image image image image
image Welcome to Ulrich Models Hobby Store image Your Account / Sign In imageLost your password?  / Register   /  Home image

Orders & Questions
Call 1-877-600-8657 (M-F)



image image

Decoder Tester

Ulrich Models - Decoder Tester
SKU: 4-DT01A

Ulrich Models Decoder Tester (No Motor)

Ulrich Models now offers a new version of the Decoder Tester with a motor and also a motor upgrade kit for decoder testers without a motor. See "Products you may be interested in" at the bottom of this listing.

  Decoder Tester Manual


  • Made in the USA
  • Easy-to-use Spring Clips for direct wire decoders (8 leads).
  • Socket for decoders with Med DCC plug or Integrated Decoders on a board (example DN143IP)
  • LEDs to indicate motor direction and function outputs
  • Current limiting resistor (jumper) to limit current and maximize protection
  • Not a kit. ready to go out of the box.

This is the same decoder tester that has been featured in several publications and videos. It has many handy uses. When coupled with the Decoder Easy Clip Harness and the 9-pin Quick Connect harness, there is virtually nothing that can't be easily interfaced to the tester. Just clip the power leads to your track or DCC system output and the decoder is powered up.

  • Verify decoder outputs including motor.
  • Check function outputs
  • Program FX lighting effects - A great way to experiment without the complication of using a locomotive
  • Remap function keys and check the results.
  • Use to check and program sound decoders with attached speaker .
Optional Decoder Tester Harness - Click image to go to the harness catalog page.

Use this handy harness to extend the functionality of your decoder tester.

  • Eight leads that cover Power, Motor, Headlamp, Backup Lamp, and Aux1 - Aux2, or other Aux Outputs

Optional 9-Pin DCC Quick Connect Harness - Click image to go to the harness catalog page.

The 9-pin harness connects the decoder tester to mobile decoders with a 9-pin DCC quick connect, female connector. The nine pin connector is used on many Digitrax, TCS, and NCE decoders. Decoders with the 9-pin connector can be plugged directly into many Proto 2000, Athearn and other DCC ready locomotives.

Note: The 9-pin DCC connector is also referred to as a JST 9-pin and Digitrax 9-pin connector

PRICE:  $45.95

You may be interested in these items 
Decoder Tester Clip Harness
Decoder Tester Clip Harness
Price: $19.95
Decoder Tester 9 Pin JST Harness
Decoder Tester 9 Pin JST Harness
Price: $6.95
Decoder Tester Motor Upgrade Kit
Decoder Tester Motor Upgrade Kit
Price: $20.95

E-mail a friend about this item.

Return to Catalog