The Select Aux4 replaces the Loksound Select

Specifications Documentation Scales HO Loksound Product Description Size 1.18" x .61" x .22" (30 mm x 1.55 mm x 5.5 mm Select Users manual Current Rating 1.1 Amp (2.0 Amps Peak)   Installation Direct Wire, 8 Pin DCC plug Application - Sound, motor and function decoder for HO scale locomotives. Sound Eight independent sound channels. Downloadable sound. Uses 4,8 or 16 ohm speakers Function Outputs 4-250 mA auxiliary outputs, two of which are used for headlight and reverse light 250ma continuous load per output at 12V DC, short circuit protected.   The LokSound Select 4AUX decoder is a shrink wrapped package similar to other sound decoders used for direct wire or DCC plug-in applications. However, to keep its size small, the 9-pin JST connector on the decoder has been eliminated. With its reduced size, the 4AUX decoder can fit easily into many locomotives where space is limited. Each Loksound Select decoder contains between 2 and 4 prime mover sounds that are selectable by CV. sixteen diesel horns are resident in the diesel decoders while steam decoders have many whistles to choose from. The horn / whistle is selected by a CV. These features have cut the number of models (sound downloads) by a factor of ten over the LokSound 3.5 decoder. The LokSound Select uses 4, 8, and 16 ohm speakers giving it great flexibility to use the best speakers on the market. The decoder also has increased audio fidelity and power over the LokSound 3.5 decoder. All new, high quality prime mover sounds for diesel and steam. The new decoder can be loaded with sound profiles using the LokSound Programmer.   LokSound Select Features   Advance consist addressing (CV-19) High output audio amplifier Four 250 mA light outputs with all popular effects (mars, ditch, gyro, etc) 8 Sound Channels Downloadable Sound profiles V Start, V Mid, and V Max Supported Automatic BEMF and ultra slow speed operation. Supports 14, 28, and 128 speed step modes Programmable acceleration, and deceleration Manual and automatic notching for diesels 16 Diesel horns resident in each diesel decoder Large variety of steam whistles in the steam decoder

Speakers Ulrich Models carries a large selection of speakers for 8 and 16 ohm applications. Dream speakers from American Hobby Distributors, QSI, SoundTraxx, and Atlas. Many different types of baffles are also available. We carry a complete line of base enhanced speakers that fit both steam and diesel locomotives. All these speakers work with the new LokSound Select.

Connection The LokSound Select has a built-in JST nine pin female connector.The LokSound Select can be plugged directly into a locomotive 9 pin DCC harness as found in Athearn and later Proto 2000 locomotives. A variety of wiring harnesses can be plugged into the decoder for maximum flexibility.

Sound Decoder Selection Display a complete list of Decoder Model Numbers and Prime Mover Sounds After you have located the desired ID, select the proper model number in the the drop-down box below. Please call or email us with any questions. Decoder sounds are being released one at time. All decoder sounds listed are not available now. Please click on the link below to see the currently available sounds. We do not have a schedule but EMD diesels sounds are coming soon. If you order a sound that is not available, we will hold the order until it is. You will not be charged until it is shipped. Display a list of decoder models (sounds) currently available