Application Documentation Stationary Plug-n-Play decoder for the Tortoise Switch Machine with extra features to make wiring and programming easier. HareManual

Features: Plugs Directly on to Tortoise™: Simplifies wiring and reduces failures. Auto Return: Automatically returns the points after a preset interval for any operational event. Auto Throw™ Automatically throws points when a train is approaching against the points! Auto Throw™ Timer: Provides for timing the auto throw function to prevent two trains from colliding. Smart Route™ Sets up to 13 routes by simple address programming in addition to the primary decoder address. Dispatcher Over-Ride™: Allows the Dispatcher to lock out all other switch commands. Lock Block Protection: Overrides the Hare's operation if a designated block is occupied. Locked Route Control™: Provides for only one route direction response for either a Throw or Clear command. Switch Speed Control™: Allows you to control the Tortoise™ motor speed. Smart Default Ops™: Upon Power-up, HARES return to either last thrown position or a programmed default. Operate Switch Signals or Panel LED Indicators. Manual Pushbutton or Toggle Switch: Allows single button or toggle switch manual control of the points. System Reset: A single CV command sets all Addresses and CVs to original factory values. Direct Current Ops: The Hare will operate on DC using Manual Push Button Control Option. Semaphore Operations: Allows the use of a Tortoise™ for triggered control of a signal head or crossing gate. Automates Reverse Loop Turnouts. Using Auto Throw feature.

Supporting Documentations

See also Wabbit™, dual DCC statinary decoder based on Hare Hare and Wabbit Programming Info for Digitrax Users Hare vs. Wabbit, Time vs. Money (PDF 1.19MB) Model Railroder Review of Hare NG is available. Using the SRC8 with DCC Specialties Products Stationary Decoder Buses with the Hare and Wabbit Supporting Documents for Tortoise™ Off-center mounting of the Tortoise™ (AN 6000-01) Switch point and signal wiring using the internal switches on the Tortoise™ switch machine (AN 6000-02) Using the Tortoise™ with Peco turnouts (AN 6000-03) Edge connectors for use with the Tortoise™ (AN 6000-04) Connecting the Tortoise™ to grade crossing detectors for crossing gate applications (AN 6000-05) “Locked” Tortoise™ switch machines (AN 6000-06) Wiring panel LEDs in series with the Tortoise™ switch machine (AN 6000-07) Remote Tortoise Mount (800-